Modular Ringlight

NEW INNOVATIVE LIGHTING SOLUTIONS

At TPL VISION we understand that the cost of dealing with illumination in your machine vision project can be very high.

The key to achieving a robust solution is known to be the correct illumination. We know that integrators have to evaluate, budget and deal with loans just to find the perfect solution.

This is why TPL Vision now offers multiple lighting solutions with just a few references.

MODULAR RINGLIGHT CONCEPT

tpl_mc_ring

RING

tpl_mc_low-angle

LOW ANGLE

tpl_mc_dark-field

DARK FIELD

tpl_mc_dome

DOME

APPLICATION EXAMPLES

  • CODE READING (1D, 2D Laser, Dot-Pin) (Laser or Engraved)
  • QUALITY CHECKING
  • SORTING
  • PRESENCE/ABSENCE VERIFICATION
Rings come in 2 sizes. You can control 2×2 as well as the colour and overdrive (x4). They are divided into 4 sectors, configurable through manual or remote control. As with all of TPL Vision’s products it is “Plug & Light” – just connect your 24VDC power supply or chose from the membrane keyboard or connect it to the PLC/SPS to get full remote control.
TPL Vision is extremely careful about BIN sorting in the selection of LEDs for their products:
Specifically for the Cyan series on this product, the human eye is very sensitive to colour variations. It may appear to the customer that they do not appear the same between two cyan LED products. Despite any noticeable differences, the peak wavelength variation does not exceed 10nm.

Here are the following bandpass camera filters we recommend to fit with the Modular Ringlight:

  • White LEDs: no filter required
  • Infrared LEDs: LP 830 (http://midopt.com/filters/lp830/)
  • Red LEDs: BP 635 (http://midopt.com/filters/bp635/)
  • Cyan LEDs: BP 505 (http://midopt.com/filters/bp505/)

We advise using bandpass filters from MidOpt: http://www.midopt.com

Product page

Brochure

Contact us

This post is also available in: French German