High Power HPFDOME

The HPFDOME is a high-power flat dome illumination solution for Machine Vision applications. This product is the next evolution of TPL Vision’s flagship MFDOME+ Standard product, carrying significant product enhancements.

Including: brightness level up to 45 kLux*, new connector making it easier and more cost effective to integrate*, improved rising and falling times of 15μs and 10μs respectively (40% Improvement*) and custom sizes available in 1cm steps (from 200 x 200mm up to 500 x 500mm or 1000 x 200mm).

The Aluminium casing of the product can be manufactured to sizes from 200 x 200mm up to 900 x 900mm or 1900 x 400mm. This range topping illumination solution is perfect for area illuminations in robotic applications, such as pick and place, and logistics applications requiring stable images on large fields of view. Available in Red, White and Infrared, the LEDs are mounted with highly efficient lenses, engineered to distribute the highest brightness and uniformity balance for the dome lighting applications.

(* in continuous working, measured at the surface with the WHITE LED version of the product).

  • Brightness increase up to 45 kLux*,
  • Standard M12 5 pin connector with remote dimming control,
  • Custom sizes available in 1cm steps.

As with all TPL Vision products, the HPFDOME comes with current control integrated and are guaranteed for 3 years. The HPFDOME comes installed with a rugged mounting plate and viewing hole for all cameras (the option for more than one hole is possible). The borders of product are 4mm around the edge of the homogeneous illumination surface (85% homogeneity).

Technical information

To view all the technical information, please click on the tabs below.

Lighting method

Size selector

Wiring diagram

Flat dome comparison

MFDOME+HPFDOME
Sizes200×200 mm to 900×900, or 1900 x 400mm200×200 mm to 900×900, or 1900 x 400mm
ModesContinuous and Strobe OverDriveContinuous and Strobe
Brightness levelUp to 32 kLux in CW
Up to 61 kLux in OverDrive
Up to 45 kLux in CW
Rise and fall time25 μs and 15 μs15μs and 10μs
OverDriveYesNo
ConnectorM12 T-Power 4-PM12 5-P with remote dimming control
Connector positionFlexible, see technical sheetFlexible, see technical sheet
IP ProtectionIP40IP40
Customisation optionsNoCustom sizes available in 1 cm steps. Two-hole version available on request.

Reference builder

  • Brightness increase up to 45 kLux*,
  • Standard M12 5 pin connector with remote dimming control,
  • Custom sizes available in 1cm steps.

As with all TPL Vision products, the HPFDOME comes with current control integrated and are guaranteed for 3 years. The HPFDOME comes installed with a rugged mounting plate and viewing hole for all cameras (the option for more than one hole is possible). The borders of product are 4mm around the edge of the homogeneous illumination surface (85% homogeneity).

Technical information

To view all the technical information, please click on the tabs below.

Lighting method

Size selector

Wiring diagram

Flat dome comparison

MFDOME+HPFDOME
Sizes200×200 mm to 900×900, or 1900 x 400mm200×200 mm to 900×900, or 1900 x 400mm
ModesContinuous and Strobe OverDriveContinuous and Strobe
Brightness levelUp to 32 kLux in CW
Up to 61 kLux in OverDrive
Up to 45 kLux in CW
Rise and fall time25 μs and 15 μs15μs and 10μs
OverDriveYesNo
ConnectorM12 T-Power 4-PM12 5-P with remote dimming control
Connector positionFlexible, see technical sheetFlexible, see technical sheet
IP ProtectionIP40IP40
Customisation optionsNoCustom sizes available in 1 cm steps. Two-hole version available on request.

Reference builder

Accessories