LED lighting for machine vision

Showing 91–105 of 109 results

• 

  SDMOUNT 80

  Mounting device for Dome 80 & Low Angle 80.

  Accessory compatible with the following product:

  • Small SDOME II 80
  • Low Angle II 80
• 

  SDMOUNT 130

  Mounting device for Dome 130 & Low Angle 130.

  Accessory compatible with the following products:

  • Small SDOME II 130
  • Low Angle II 130
• 

  PNP to NPN converter

  The ACC-PNP-NPN-2M is intended for use with TPL Vision’s Fluorescence Imaging Solution (FIS). It converts PNP signals into NPN signals on pin 2 of the M12-5P connector. It is a simple accessory intended to simplify connection with cameras and strobe trigger lines.

  Please see the technical documentation for further information.
• 

  M12 5-pins cable

  Compatible with the following products:

  • EBAR+ Standard, Link, Overdrive
  • BLBAR+ Standard, Link, Overdrive
  • M-EBAR
  • M-TBAR
  • Modular Ringlight (power, strobe & dim)
  • FIS (Fluorescence Imaging Solution)
  • HPBACK
  • HPFDOME

  End of life products:

  • LBAR+
  • EBAR Curve
• 

  M12 5-pins cable (male-female)

  Compatible with the following products:

  • EBAR+ Link, Overdrive
  • BLBAR+ Link, Overdrive
• 

  M12 4-pins T-Power cable

  Compatible with the following products:

  • EBAR+ Overdrive
  • BLBAR+ Overdrive
  • MBACK+ Standard, Overdrive
  • CMBACK+ Standard, Overdrive
  • Bn’L Standard, Overdrive
  • MFDOME+ Standard, Overdrive
  • FLOOD Light
• 

  M12 4-pins cable

  Compatible with the following products:

  • SBAR, TSPOT1 and TSPOT4
  • SDOME II and Low Angle II
  • TRING
  • SBACK II and CSBACK

  End of life products:

  • MBACK and LBACK
  • EBAR, BLBAR, LBAR and XBAR
• 

  M12 8-pins cable

  Compatible with the following products:

  • Modular Ringlight (control)
  • XBAR RGB
• 

  M8 3-pins cable

  Compatible with the following products:

  • HPRING
  • LDOME
• 

  M8 3-pins cable (male)

  Compatible with the following products:

  • ThinLED 1
  • ThinLED 4
• 

  M5 4-pins cable

  Compatible with the following products:

  • Square Light RGB
  • Tiny’z AD (end of life product)
• 

  Brick cable

  Compatible with the following products:

  • LED BRICK
• 

  Interbrick cable

  Compatible with the following products:

  • LED BRICK
• 

  FULL FCONTROL

  The Full FCONTROL is a current control electronics module that provides led systems with steady current. Easy to use, it enables a very precise setting of the output current. Therefore, thanks to the Full FCONTROL, led lightings are perfectly protected against the temperature and supply voltage variations. The Full FCONTROL can work from 7 VDC to 30 VDC. In all cases, the supply voltage has to be higher than the expected voltage for the leds. The strobe activation and the current setting are made through switches. Each channel is customizable separately.

  The Full FCONTROL is protected against polarity reversal (in and out), in order to avoid any destruction.

  • CONTINUOUS AND STROBE MODES,
  • 2 DIFFERENT CHANNELS,
  • CURRENT : 350, 700 OR 1 000 MA,
  • NEW CASING, MORE ERGONOMIC.
• 

  TIME TCONTROL

  The Time TCONTROL is an electronics module that enables the control and the regulation of current in TPL Vision’s led lightings manufactured without electronics (SE), only in strobe mode. Thanks to the Time TCONTROL, you can supply the lighting with power, regulate the current, control the rising time and control the camera triggering (from 5 ms to 1 000 ms). The Time TCONTROL is equipped with 2 switches: switch 1 for the current setting and switch 2 for the rising time control. According to the kind of lighting, the Time TCONTROL has to be supplied with a voltage situated between 7 VDC and 28 VDC. Thanks to a delayed-action output (PNP or NPN), it enables the triggering of the shooting at the most relevant time, when the lighting intensity is stabilised.

  • STROBE MODE,
  • CURRENT : 350, 700 OR 1 000 MA,
  • RISING TIME CONTROL FROM 5 MS TO 1 000 MS,
  • CAMERA TRIGGERING,
  • CASING ERGONOMIC.