LED lighting for machine vision

Showing 31–45 of 90 results

• 

  Small SDOME II

  • Simple, lightweight dome light
  • Current control integrated
  • 80mm and 130mm IntØ

  Equipped with new leds, the SMALL SDOME II has a lighting power 4 to 5 times higher than the previous version used to have for white and red leds (WHI & 630). The SMALL SDOME II offers a diffuse and homogeneous indirect lighting that lessen reflections and enable a reliable quality control process on curved and shiny surfaces.

  This is the ideal lighting for bar codes and 2D codes reading. Thanks to the ingenious clipping system, the hole located on the top of the dome can be easily customized, so as to fit the camera’s lens perfectly.

  Available in two sizes (80 cm an 130 cm), the SMALL SDOME II is compliant with industrial standards, including connection (M12 connector).
• 

  Large LDOME

  • Large area dome light
  • Continuous and strobe mode
  • 300mm IntØ

  The LARGE LDOME is the biggest TPL Vision’s dome. Either in continuous or in strobe mode, the LDOME provides a very diffuse indirect lighting. No doubt that this is the indispensable lighting for rounded shiny surfaces.

  The LDOME reveals all its potential in robotics (ex: resetting process) and also in quality control (ex: surface defects, marking reading, materials lacks).

  • BIG SIZE
  • CONTINUOUS OR STROBE MODE
  • VARIOUS LED COLOURS
• 

  MR-Low Angle

  • Powerful 45° low angle light
  • OverDrive, sectors, bicolour
  • 80mm and 130mm IntØ

  The MR-LOW ANGLE is compound of a bi-colour LED lighting ring (2 sets of colours and 2 dimensions) and a low angle reflector, with an angle of incidence of 45°.

  It has been designed with tough production environments in mind: IP65 as standard, overdrive embedded, simple remote control capability (selection of colours and quadrants).

  It is used for applications where a direct light source is considered too harsh or bright but the diffused light provided by the Dome version is not enough intensity. The light source will provide some degree of homogeneity.
• 

  Low Angle II

  • Simple low angle light
  • Current control integrated
  • 80mm and 130mm IntØ

  The LOW ANGLE II provides a darkfield lighting, very popular among industrial vision professionals. Equipped with new leds, this version is 4 to 5 times more powerful than the previous version (as far as white and red leds are concerned). Placed closely to the surface, it provides an homogeneous lighting with a low incidence angle.

  The LOW ANGLE II can detect any kind of reliefs on flat surfaces. It turns out to be very useful to check engravings and to highlight edges, holes and cracks.

  The LOW ANGLE II can be easily set up on a production line, thanks to the M12 connector. The two versions (80 and 130 mm) can cope with the most demanding industrial standards, either in continuous or in strobe mode.
• 

  Square Light

  • Adjustable RGB Lighting
  • 4 independent bars
  • Flexible lighting angles

  TPL Vision’s SQUARE LIGHT is renowned for its modularity : compound of 4 independent swiveling bars, it can be used in directive or darkfield lighting. The SQUARE LIGHT works in RGB, what can be very useful when the pieces to be lighted evolve over time, regarding the shape and the colours.

  The SQUARE LIGHT is recommended to read codes, references and best before dates. Its is also particularly indicated to increase the contrasts of coloured products, coming from the perfume world, the food industry and the pharmaceutical sector.

  • DIRECTIVE OR DARKFIELD LIGHTING
  • 4 INDEPENDENT BARS
  • RGB PRODUCT
• 

  Angle Changers

  The Angle Changers are the easiest way to change the illumination angle, allowing greater flexibility & the ability to adjust your lighting if your project changes. They are designed to securely clip on top of the EBARs. The Angle Changers can sustain 100g acceleration and they keep the IP protection. No need to dismantle the product!

  Advantages

  • Quickly identify the best illumination solution with our Angle Changer Combos
  • Have confidence in your product selection
  • Achieve better homogeneity across the FoV

   
• 

  BAR diffusers

  • The Transparent Diffuser (DT) aims to protect the lighting and to ensure a better lifespan.
  • The Opaque Diffuser (DO) transforms the lighting power to a diffuse homogeneous lighting.
  • The Satin Diffuser (DS) enables the close lighting of a workpiece, without any hot spots and reduces shiny effects.

  By default, the EBAR+ is delivered with transparent diffusers, the BLBAR+ with an opaque diffuser. You can also order more diffusers separately.
• 

  HPRING diffusers

  Accessory compatible with the following products:

  • HPRING

   
• 

  TRING diffusers

  Accessory compatible with the following products:

  • TRING
• 

  SBAR diffusers

  Accessory compatible with the following products:

  • Spot SBAR
• 

  TSPOT1 diffusers

  Accessory compatible with the following products:

  • TSPOT 1
• 

  BAR polarizer

  Set between the led and the diffuser, the polarizer helps to delete the reflection of the lighting on the workpieces to be controlled. The camera, equipped with a polarizer filter, a.k.a analyzer, can then start the analysis of the parts, without being disturbed by shiny effects. Polarizer can be very useful to lead a quality control of workpieces packed in transparent plastic bags. Only available for visible wavelengths, the polarizer highly reduces the lighting power (about 50%). Beware ! Since it has a short lifespan, the polarization properties of the polarizer have to be checked regularly.
• 

  HPRING polarizer

  Accessory compatible with the following products:

  • HPRING
• 

  TRING polarizer

  Accessory compatible with the following product:

  • TRING
• 

  SBAR polarizer

  Accessory compatible with the following products:

  • Spot SBAR