LED lighting for machine vision

Showing 61–75 of 127 results

• 

  BAR diffusers

  The Transparent Diffuser (DT) aims to protect the lighting and to ensure a better lifespan.

  The Opaque Diffuser (DO) transforms the lighting power to a diffuse homogeneous lighting.

  The Satin Diffuser (DS) enables the close lighting of a workpiece, without any hot spots and reduces shiny effects.

  By default, the EBAR+ is delivered with transparent diffusers, the BLBAR+ with an opaque diffuser. You can also order more diffusers separately.
• 

  HPRING diffusers

  Accessory compatible with the following products:

  • HPRING

   
• 

  TRING diffusers

  Accessory compatible with the following products:

  • TRING
• 

  SBAR diffusers

  Accessory compatible with the following products:

  • Spot SBAR
• 

  TSPOT1 diffusers

  Accessory compatible with the following products:

  • TSPOT 1
• 

  Z-SPOT polariser

  Accessory compatible with the following products:

  • Z-SPOT

  NOTE: Not for use with UV 405nm, 385nm and 365nm options of the Z-SPOT. If you require a polariser for a UV Z-SPOT, please get in touch with your sales representative to discuss your options.
• 

  BAR polariser

  Set between the led and the diffuser, the polariser helps to delete the reflection of the lighting on the workpieces to be controlled. The camera, equipped with a polariser filter, a.k.a analyser, can then start the analysis of the parts, without being disturbed by shiny effects. Polarisers can be very useful to lead the quality control of workpieces packed in transparent plastic bags. Only available for visible wavelengths, the polariser highly reduces the lighting power (about 50%). Beware! Since it has a short lifespan, the polarisation properties of the polariser have to be checked regularly.
• 

  HPRING polariser

  Accessory compatible with the following products:

  • HPRING
• 

  TRING polariser

  Accessory compatible with the following product:

  • TRING
• 

  SBAR polariser

  Accessory compatible with the following products:

  • Spot SBAR
• 

  TSPOT1 polariser

  Accessory compatible with the following products:

  • TSPOT1
• 

  MR-Dark Field Accessory

  • Accessory to convert the Modular Ringlight into a dark field illumination. Compatible with 80mm and 130mm versions.
  • Powerful dark field effect with a very low angle incident light to highlight edges and surface details.
  • 4x M3 screws supplied.
• 

  Combo Kit – Modular Ringlight

  The Modular Ringlight Combo Kit contains:

  • 1 or 2 Rings (either 80 or 130mm)
  • 1 Dome accessory
  • 1 Low Angle accessory
  • 1 Dark Field accessory
  • 1 mounting device (TPL-MOUNT-MR)
  • 1 power supply with 3 cables (EU, UK, US)
  • 1 briefcase
• 

  MR-Dome Accessory

  • Accessory to convert the Modular Ringlight into a homogeneous dome light. Compatible with 80mm and 130mm versions.
  • 4x M3 screws supplied.
  • Comes with clip-in inserts to reduce the camera opening.
• 

  MR-Low Angle Accessory

  • Accessory to convert the Modular Ringlight into an intense low angle light. Compatible with 80mm and 130mm versions.
  • Powerful 45° low angle lighting for applications that cannot be illuminated with a direct light source.
  • 4x M3 screws supplied.